Sarma sudura incarcare dura Bohler
65€
Pret in Euro, fara TVA. Factura se emite in RON + TVA, la curs BNR.
Cere o oferta pentru acest produs
UTP AF ROBOTIC 601 este o sârmă metalică aliată cu crom-niobiu, seamless, pentru încărcare dură, utilizând gaz protector Ar-CO2, fără zgură. Depozitul de încărcare dură produce o duritate ridicată datorită carburilor speciale, dar rămâne fără fisuri. Un tampon de UTP A 63 este recomandat doar pentru materiale critice sau pentru acumularea de straturi multiple. În aceste cazuri, doar ultimele două cordoane trebuie sudate cu UTP AF ROBOTIC 601. Este potrivită pentru piese rezistente la uzură supuse la impacturi și șocuri puternice, precum și abraziune. Metalul sudat este prelucrabil numai prin șlefuire. Domeniu de utilizare: Această sârmă este potrivită în special pentru echipamente de reciclare, muchii așchietoare, lanțuri transportoare, fălci de concasare și conuri.
WEARcore Dur 600 este un aliaj de oțel martensitic conceput pentru sudarea în poziții orizontale și verticale ascendente sub protecție gazoasă. Rezistența sa la frecare și uzură abrazivă la stres redus cu impact moderat este excelentă.
Microstructură: Martensită
Prelucrabilitate: Numai șlefuire
Tăiere oxiacetilenică: Tăierea cu flacără este dificilă
Grosimea depunerii: Depinde de aplicație și procedura utilizată
Domeniu de utilizare: Dinți de cupă, pompe de pietriș, lanțuri transportoare, piese metalice glisante, dinți de angrenaje, ciocane concasoare, foreze de rocă
Caracteristici cheie Sârmă cu miez metalic protejată de gaz. Rezistență excelentă la frecare și uzură abrazivă la stres redus cu impact moderat. Duritatea depunerii pure de sudură: 59 HRC
Aplicații tipice Întărirea suprafețelor expuse la tipuri combinate de uzură, cum ar fi dinți de cupă, pompe de pietriș, lanțuri transportoare, piese metalice glisante, dinți de angrenaje, ciocane concasoare.
| WEARcore Hydrocav | Gas-shielded metal-cored wire, suitable for surfacing of parts where high resistance to cavitation, corrosion, pressure and impact is required.Hardness: 220 HB | MF 6-GF-200-K | T Z Fe 9 | ||
| WEARcore MnCr13 | Gas shielded metal-cored wire, multi-purpose cored wire, mainly used for rebuilding and joining of Carbon and 14% Manganese steels subjected to heavy impacts.Hardness: 190 HB | MF 7-GF-200-KP | 14700, T Fe 9 | ||
| WEARcore Dur 600 | Gas shielded metal-cored wire, good resistance to metal-to- metal wear with low abrasion and moderate impact loads.Hardness: 59 HRC | MF 6-GF-90-GP | T Fe 6 | ||
| UTP ROBOTIC CHROMELESS 600 | Gas-shielded metal-cored wire, seamless, chromium and nickel free, for wear-resistant hardfacing applications on parts subject to a combination of pressure, impact and abrasion wear.Hardness: 60 HRC | T Z Fe 8 | |||
| UTP ROBOTIC 601 | Gas-shielded metal-cored wire, seamless, especially suited for automated welding, high hardness as a result of special carbides but remains crack free.Hardness: 60 HRC | MSG6-GF-60-GP | T Fe 8 | ||
| UTP ROBOTIC 600 | Gas-shielded metal-cored wire, seamless, good weldability, good resistance to abrasion, minimized slag formation with easy slag removal, especially suited for automated welding.Hardness: 59 HRC | MSG6-GF-60-GP | T Fe 8 | ||
| UTP ROBOTIC 352 | Gas-shielded metal-cored wire, seamless, multi-purpose cored wire, especially suited for automated welding.Hardness: 350 HB | MSG1-GF-350-P | T Fe 1 | ||
| UTP ROBOTIC 257 | Gas-shielded metal-cored wire, seamless, especially suited for automated welding, the deposit guarantees an elevated resistance to both abrasion and strong impacts.Hardness: 250 HB | MSG 7-GF-250-KP | T Fe 9 | ||
| UTP ROBOTIC 250 | Gas-shielded metal-cored wire, seamless, suited for wear-resistant parts subject to heavy impact and shock, especially suited for automated welding.Hardness: 250 HB | MSG 1-GF-250-P | T Fe 1 |
| WEARcore XD NiW46 | Gas shielded metal-cored wire, nickel matrix with Tungsten carbides, outstanding resistance to abrasive wear even when wear occurs in a corrosive environment.Hardness: 44 HRC (Matrix) | MF 22-GF-45-G | T Fe 20 | ||
| WEARcore XD 65 | Gas shielded metal-cored wire, alloyed with Chromium-Niobium-Molybdenum, Tungsten and Vanadium designed to resist high stress grinding abrasion with low impact and solid erosion at service temperatures up to 650°C.Hardness: 63 HRC | MF 10-GF-65-GT | T Fe 16 | ||
| UTP ROBOTIC 6011 | Gas-shielded metal-cored wire, seamless, NiB-alloyed, excellent resistance to abrasion induced by sand and minerals.Hardness: 64 HRC | MSG 2-GF-55-G | T Fe 13 | ||
| UTP Robotic 6010 | Gas-shielded metal-cored wire, seamless, designed to deposit an alloy resistant to high stress grinding abrasion with low impact.Hardness: 60 HRC | MSG 10-GF-60-CGP | T Fe 15 |
| WEARcore Co 25 | Gas shielded metal cored wire, Cobalt base alloy for hot working tools, forging hammers.Hardness: 195 HB | MF 20-GF-200-CTZ | T Z Co1 | ||
| WEARcore Co 21 T | Metal cored wire, Cobalt base alloy, designed to be used with the GTAW process (TIG).Hardness: 31 HRC | MF 20-GF-300-CTZ | T Co1 | ||
| WEARcore Co 21 | Gas shielded metal cored wire, Cobalt base alloy, for extrusion dies, hot working tools, turbine injectors, valve seats, ingot tong bits.Hardness: 32 HRC | MF 20-GF-300-CTZ | T Co1 | ||
| WEARcore Co 12 | Gas shielded metal cored wire, hardfacing, cobalt alloy. Excellent resistance to metal-to-metal and abrasive wear with moderate impacts.Hardness: 49 HRC | MF 20-GF-50-CTZ | T Co3 | ||
| WEARcore Co 6 T | Metal cored wire , Cobalt base alloy, designed to be used with the GTAW process (TIG).Hardness: 41 HRC | MF 20-GF-40-CTZ | T Co2 | ||
| WEARcore Co 6 A | Gas shielded metal cored wire, Cobalt base alloy, for valves, valve seats in motor vehicles, hot shear blades, extruder screws, clack valves and seats, dies, punches.Hardness: 43 HRC | MF 20-GF-45-CTZ | T Z Co2 | ||
| WEARcore Co 6 | Gas shielded metal cored wire, Cobalt base alloy, for extrusion dies, hot working tools, turbine injectors, valve seats, ingot tong bits.Hardness: 40 HRC | MF 20-GF-40-CTZ | T Co2 | ||
| WEARcore Co 1 | Gas shielded metal cored wire, Cobalt base alloy, for mill guides, palm nut oil extruder, plastic extrusion screws, mixer blades, scrapers, rubber mixer.Hardness: 54 HRC | MF 20-GF-55-CTZ | T Co3 |
| UTP ROBOTIC 603 | Gas-shielded metal-cored wire, seamless, Cr-Mo-W-V alloyed, for abrasion and moderatestress-resistant surfacing applications up to 550 ºC Hardness: 61 HRC | MSG 3-GF-60-ST | T Fe8 | ||
| UTP ROBOTIC 554 | Gas-shielded metal-cored wire, seamless, especially suited for automated welding, ery stable arc, low spatter emission, low amount of slag.Hardness: 55 HRC | MSG 3-GF-55-ST | T Fe8 | ||
| UTP ROBOTIC 503 | Gas-shielded metal-cored wire, seamless, especially suited for automated welding, especially suited for hot-wear resistant surfacing.Hardness: 50 HRC | MSG 3-GF-50-ST | T Fe8 | ||
| UTP ROBOTIC 453 | Gas-shielded metal-cored wire, seamless, especially suited for automated welding, for wear-resistant hardfacings on parts subject to abrasion, compression and high temperature.Hardness: 44 HRC | MSG 3-GF-45-ST | T Fe3 | ||
| UTP ROBOTIC 405 | Gas-shielded metal-cored wire, seamless, especially suited for automated welding, low carbon content, for forging tools.Hardness: 40 HRC | MSG 5-GF-40-P | T Fe3 | ||
| UTP ROBOTIC 404 | Gas-shielded metal-cored wire, seamless, medium alloyed for pressure and abrasion resistant surfacing applications up to 550°C such as hot wor tool steels.Hardness: 40 HRC | MSG 3-GF-40-ST | T Fe3 | ||
| WEARcore Tool NiCrCo | Gas-shielded core wire, nickel alloy for surfacings on forging tools subjected to extremely high temperatures.Hardness: 200 HB | MF 23-GF-200-TZ | T Ni2 | ||
| WEARcore Tool 60 | Gas shielded metal cored wire, designed to deposit a molybdenum-alloyed high-speed steel.Hardness: 61 HRC | MF 4-GF-60-D | T Fe4 | ||
| WEARcore Tool 58 | Gas shielded metal cored wire for cold and hot work tool steels and parts subject to abrasion and impacts.Hardness: 58 HRC | MF 3-GF-60-GT | T Fe8 | ||
| WEARcore Tool 50 Co | Gas-shielded metal cored wire for hot work tool steels,stainless. Application temperature up to 650°C.Hardness: 50 HRC | MF 6-GF-50-CT | T Z Fe7 |
| WEARcore 741 | Gas-shielded metal-cored wire designed to resist metal-to-metal wear, corrosion and thermal fatigue fire cracking, surfacing of continuous casting rollers of very small diameters.Hardness: 40 HRC | MF 5-GF-40-C | T Fe7 |
Pretul afisat este pentru un pachet 6Kg WEARstick Dur 350. In functie de proiectul Dvs. se va bugeta pret special in functie de produs si cantitate.
Livrare produse
Produsele se vor livra si plati utilizind modalitatea aleasa de dvs. la efectuarea comenzii. Produsele se afla in ambalajul original al producatorului si sunt absolut noi.
Termenul de livrare al produselor cumparate de pe site-ul nostru se confirma de catre un operator Detop Online Srl, dupa plasarea comenzii. Comanda poate sa fie anulata daca termenul nu este acceptabil. In conditii speciale Detop.ro isi asuma dreptul de a mari timpul de livrare anuntind clientul despre aceasta.
Tarife FanCurier
- Colete: 15 lei pentru primul kg /destinatie.
- 1.2 lei/pentru fiecare kg suplimentar.
- 1.20 lei/pentru fiecare km efectuat in cazul expeditiilor in afara retelei FAN COURIER EXPRESS intr-un sens
- ramburs : 5 lei
Produse similare
Electrozi sudura Bohler FOX EV 60 3.2
95€Pret in Euro, fara TVA. Factura se emite in RON + TVA, la curs BNR.
Recenzii
Nu există recenzii până acum.